Universal Bottle Trap with washing machine (...)

For use in Kitchen, Bathroom, Hand-basin etc.

Advantages

• Ø32 / Ø40 “PUSH FIT” SYSTEM = no adhesives or tools required !
• The same bottle trap can be fitted onto wash-basins, hand-basins, bidets or sinks.
• This is a UNIVERSAL bottle trap !
• Makes installation a child’s play ! No more nuts to tighten, simply push the pipe into the bottle trap outlet.
• Multi-diameter outlet : the same bottle trap can be used with 4 different diameters of pipe : Ø32 and Ø40 mm for the European market - Ø35 and Ø43 for the UK market.
• No more risk of forgetting a washer during assembly : the washers are cast mould as an integral part of the bottle trap. No more leaks !
• Connection to the waste outlet : an elastomer converter is fitted onto the bottle trap in the factory. Customers keep it if they are fitting a wash-basin, handbasin or bidet (1”1/4 waste outlet). They throw it away and replace it with a standard washer (supplied), if they are fitting a sink (1”1/2waste outlet).
• Takes up less space : this is the smallest bottle trap on the market with 50mm water seal (minimum height demanded by the standard in force to keep out smells).
• Easier to clean : Its smooth surface only needs to be wiped with a sponge. Unsightly nuts that are real dust-traps have been eliminated.
• The end of the trap comes on and off with a simple 1/6th turn.
• With washing machine connection

TECHNICAL FEATURES

• Washers cast mould in thermoplastic elastomer
• Flow 0.80 litre / second with a Ø32 pipe, 1.04 litre / second with a Ø40 pipe
• Space needed Standard bottle trap : < 125 mm, Bottle trap with connection for washing machine : <165 mm
• Effort needed to connect pipes D40 = 140 N, D32 = 50 N
• Water seal 50 mm